Wrought Iron Palisade Fence Panels, Gates

We will be very pleased to supply wrought iron fences and to cooperate with you and your esteemed company, whether you are importers, contractors or trading companies.

Tripline team can design, manufacture and supply of Wrought Iron Palisade fence with accessories constructed of required materials as per approved detailed design and drawings.

Wrought iron palisade fence products we supply are listed as following.

Wrought Iron Palisade Fences with Electrically Operated Gates System

3000mm height wrought iron fences for Kingdom of Saudi Arabia.
Service including: Design, Supply & installation of Wrought Iron Palisade fence and submit all necessary calculations and drawings then supply all required materials and construct as per approved final detailed design and drawings including all accessories as specified.

Single Sliding Steel Gate

Design, Supply & installation of Single Sliding Steel gate (Electrically operated) a Cantilever Design High Security Standard, Fully Pre -
assembled.
Constructed per required materials as per approved detailed design and drawings
All accessories as specified in the drawings supplied.
Security single gate size: 2,600mm H x 8,000mm L

Double Leaf Swing Steel Gate

Design, Supply & installation of Double Leaf Swing Steel gate electrically operated
Constructed per required materials as per approved detailed design and drawings
All accessories as specified in the drawings supplied.
Double leaf gate size: 2,600mm H x 2,200mm L

Double Leaf Swing Steel Gate
Design, Supply & installation of Double Leaf Swing Steel gate electrically operated
Constructed per required materials as per approved detailed design and drawings
All accessories as specified in the drawings supplied.
Gate size: 2,600mm H x 4,000mm L

Wrought Iron Palisade Fence for Project in Dhahran, Kingdom of Saudi Arabia
Quantity, Specification and Drawings
Project drawing

Wrought Iron Palisade Fence - Site Fencing
Wrought Iron Palisade Fence, with ornamental pickets, installed with precast concrete base middle sandblast finish

Wrought Iron Fence Panels with Pickets Powder Coated Black

Wrought fence panels 4 feet, 5ft, and 6ft high x 8 in length.
Rails: 1x1 top and bottom rails
Fence pickets: 1/2 x 1/2
Finish: Powder coated black.
Fence & gate designed for commercial projects in Australia, height required of 1.6 - 1.8m

Wrought Iron Tubular Fencing - Black Steel Bar Fencing

Exported for Turkey
Flat bars, size from 10x3 mm up to 150x50 mm
Square bars, size from 7x7 mm up to 60x60 mm
Round bars, size from 8 mm up to 80 mm
Equal angle bars, size from 20x20x2.2 mm up to 50x50x6 mm
Length: 5.80 to 6 Meters

Fencing Installation and Choosing

Popular wrought iron fence panel for installing: 10ft long x 4ft high

Sections can be bolted to square concrete columns at a distance of 10ft between each column.
Each end has no posts on the ends and a 3" x 3" plate on the ends of the rods to bolt each section to the columns.
Each plate with 4 ¼" holes for bolting to the columns.

Wrought iron fences are popularly used for most architect, pool and residential fencing uses with beautiful ornamental effect and classical style. However, an alternative of hot dipped galvanized steel fences are commonly chosen in salt water environment and seashore areas against rusts and corrosion.

Wrought Iron Fencing for Swimming Pool Safety

Fencing rod iron panels with post:
Fence panels 6' high x 8' wide