PALISADE FENCE GATE

We supply palisade steel gates as important parts for Palisade Fence System. Tubular fencing gates designed in single gate or double gates are for accessing pedestrian and motors. Like palisade fence panels, the framed gate panels can be topped with anti climbing barbed wires.

Leaf types:
Single leaf palisade gate
Double leaf gate

Pales for gate panels:
D pales
W pales

Anti corrosion protection types:
Palisade gates, hot dipped galvanized
Palisade gates, galv. and powder coated pvc

Applications:
Double Door Motor Gate
Single Security Gate
Entry / entrance Gate
Pedestrian Gate 

Palisade Double Leaf Gate

Common Specification for Palisade Double Leaf Swing Gates with Accessories

Safety gates supplied to work with D section triple pointed palisade fence system.

Type	Palisade Double Leaf Swing Gate
Size	6.0 M wide * 4.05 M High
Frame	Made out of 80 *40 *4mm Thk. RHS.
Bracing	Made out of 80 *40 *4mm Thk. RHS.
Accessories	As per standard manufacturing practice
Gate Post	Steel tube
Infill	Pales made out of 3.0mm thickness Cold rolled steel "D" section profile with triple point, 70 mm wide, fixed at 160 mm C/C. Pales are welded to Frame
Finish	Metals Hot Dip Galvanized to BS EN ISO 1461.
Tops options	Galvanized barbed wire, razor wire coils.

Palisade Single Leaf Gate 1.21m Width

 

Common Specification for Palisade Single Leaf Swing Gate with Accessories

Single gates supplied to work with Black Powder Coated Palisade Fence System

Type	Palisade Single Leaf Swing Gate
Size options	1.21 M wide * 2.25 M High 1.7 M wide * 1.65 M - Fixed Panel. [Total Height - 3.9 m]
Frame	Made out of 80 *40 *4mm Thk. RHS.
Bracing	Made out of 80 *40 *4mm Thk. RHS.
Accessories	As per standard manufacturing practice
Gate Post	Steel tube
Infill	Pales made out of 3.0mm thickness Cold rolled steel "D" section profile with triple point, 70 mm wide, fixed at 160 mm C/C. Pales are welded to Frame
Finish	Metals Hot Dip Galvanized BS EN ISO 1461, powder coated, coating standard EN 10245-1/ IS 13871
Tops options	Galvanized barbed wire, razor wire coils.

Gates Installation

- Gates are designed in various gate widths/height and overall weight to match different high palisade panels.
- Pales of various types are affixed once the gates are installed.
- Gates are designed with sliding lockable mechanisms.
- Double leaf gates are generally hinged "in line" with the supporting posts, offering the ability to open outward or inward.
- Single gates are generally hinged on the left and open inward only.
- Should gates need to be hinged differently, this must be advised at the time of ordering.